Removal Guide

WELLvisors - Window visors removal Guide

If you decided to remove the visors from your vehicle, please follow below instructions, do not remove the visor by force as you might damage the paint / door molding.

1. Remove all locking pins: If the set uses locking pins for installation, please use a small screw driver to push the needle pin out from inside of the vehicle. 

If the set uses top mounting brackets for installation, use a plastic pry bar to detach the bracket from the door frame.


2. Use dental floss to slowly separate adhesive from visor.


3. Once the visor is separated from the adhesive, gently remove the visor from the door frame.


4. Clean up adhesive residual from door frame, you can use Goo-Gone to speed up